For Increasing 12VDC to 24V - 30VDC to run a Bally/Williams Replay Knocker
Works best with 23-800 coils at 24VDC

  • This 150W DC-DC Boost Converter 10-32V to 12-35V module allows you to step up an input voltage as low as 10V and set the output to 12V-35V. 

    The output voltage will be higher than the input voltage.

    The boost converter design is based on popular Texas Instrument’s UC3844 current mode PWM controller chip.

  • Input Voltage: 10v – 32v DC
  • Output Voltage: 12v – 35v DC
  • Output Current: 6A MAX
  • Input Current: 10A (MAX)
  • Output Ripple: 2% MAX
  • Working Temperature: Industrial – 40C to +85C (Environmental temperature, more than 40C, reduce load wattage or enhance cooling)
  • Full-Load temperature: 45 degrees.
  • No-load current: 25mA typical.
  • Voltage regulation: ± 0.5%.
  • Load regulation: ± 0.5%.
  • Dynamic response speed: 200uS 5%.
  • Short circuit protection: None (Please Install fuses and protection circuits at Input port.)
  • Input Reverse Polarity Protection: None (Please Series diode at the input port.)
  • Size: 2.60 in (L),  1.85 in (W) , 1.1 in (H)
  • Weight: 2.30 oz (66 g)

150W DC - DC Booster

  • Product Code: 150WDCDC
  • Availability: 1
  • $15.00 USD

Tags: 150W DCDC Converter