WEMOS D1 ESP8266 Controller for serial addressable led control running Zebsboards custom firmware

(While the board has ZB firmware it can be re-flashed to run the publicly available firmware found on Pincab Passion)

Kit includes:

- Pre-programmed WEMOS D1 controller installed on socketed connectors for easy replacement

- WEMOS break out board with 8 outputs, 3 Ground Inputs, 1 power Ground std

- on-board connectors are spring loaded tool -free connectors capable of up to 18AWG wire

- Outputs are pre-limited with 100 ohm resistors for impedence matching

- Ring connector for connecting power ground to ground stud

- 6 foot USB micro B cable with filter choke

- 3D printed mounting plate

- fully tested cabinet.xml file available and fully tested compatibility with the latest Grander Unified DOF build

 to get you up and running immediately

- Maximum limit of 6400 leds / 1000 leds per output

Serial Controller in operation


Write a review

Please login or register to review

Serial Addressable LED Controller - WEMOS

  • $35.00USD